Plumbers Trust Ball Valve Controls in a Two Way Valve

As a home and business owner, you may not know much about plumbing. Our water lines either work and we have water, or they don’t and water stops flowing. Beyond that, you also know when it is leaky, drippy, or dry in your counter, around your toilet, and out of your faucets. It makes sense. You probably did not grow up saying, “I want to be a plumber.” However, if you ever find yourself in a situation where you need to know the basics, you should know that plumbers trust ball valve controls in a two way valve.

A valve is a part of your plumbing that dictates whether the water is turned on, turned off, regulated, or controlled in some other way. A ball valve is typically one that allows water in, but can, if necessary be turned off. It will control water flow to a variety of areas in your home with only the twist of its knob. For instance, it is what will allow your water heater to have water that is unrestricted and always on unless there is a problem.

If you need to turn off a water valve, you can turn off individual ones or turn off the water’s mainline into your home. The ball valve will allow you to turn it off in a more generalized area. Such as turning off the water going upstairs, while leaving the downstairs on. This can be very helpful. However, it is recommended that you know which valve controls what area and how to choose the best one for your needs. There are several different types of valves. In the event that you are unsure, you will want to ask a plumber.

To install it, you will either want to contact your plumber or at the very least turn off your main water supply. Otherwise, you will end up having water that flows freely without any hope of stopping it once you remove this valve.

If you feel confident that you can replace it on your own. It is important you know that when buying a two way valve, you want to choose either a stainless steel or brass with a control knob. The knob that is flush with the valve will indicate that it is open. Twisted to the side will indicate that it is turned off. At one time, copper was used in some homes, but over the years they corrode. This is not as much of a concern with the brass or stainless. You may also get chrome-plated, which is also something your plumber would choose.

Random Posts

Previous post:

Next post: